Danfoss vlt AQUA Instruction Manual page 83

®
VLT AQUA Drive
Instruction Manual
0-38 Display Text 2
Range:
0 N/A* [0 - 0 N/A]
0-39 Display Text 3
Range:
0 N/A* [0 - 0 N/A]
0-70 Set Date and Time
Range:
2000-01-01 [2000-01-01 00:00]
00:00 –
2099-12-01
23:59 *
0-71 Date Format
Option:
[0] * YYYY-MM-DD
[1] DD-MM-YYYY
[2] MM/DD/YYYY
0-72 Time Format
Option:
[0] * 24 h
[1] 12 h
0-74 DST/Summertime
Option:
[0] * OFF
[2] Manual
Function:
In this parameter, it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 2 in par. 0-20
Line 1.1 Small Display Line 1.2 Small
, par. 0-21
Line 2 Large Display Line 3 Large
or par. 0-24
◀ ▶
character. Use the and buttons to move the cursor. When a character is highlighted by the
cursor, this character can be changed. A character can be inserted by placing the cursor between
▲
two characters and pressing or
Function:
In this parameter, it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently, select Display Text 3 in par. 0-20
Line 1.1 Small ,par. 0-21 Display Line 1.2 Small
Line 2 Large Display Line 3 Large
or par. 0-24
◀ ▶
character. Use the and buttons to move the cursor. When a character is highlighted by the
cursor, this character can be changed. A character can be inserted by placing the cursor between
▲
two characters and pressing or
Function:
Sets the date and time of the internal clock. The format to be used is set in par. 0-71 and 0-72.
NOTE!
This parameter does not display the actual time. This can be read in par. 0-89.
The clock will not begin counting until a setting different from default has been
made.
Function:
Sets the date format to be used in the LCP.
Sets the date format to be used in the LCP.
Sets the date format to be used in the LCP.
Function:
Sets the time format to be used in the LCP.
Function:
Choose how Daylight Saving Time/Summertime should be handled. For manual DST/Summertime
enter the start date and end date in par.0-76
End .
®
MG.20.M5.22 - VLT is a registered Danfoss trademark
8 How to program the adjustable frequency
Display Line 1.3 Small
, par. 0-22
▲ ▼
. Use the or buttons on the LCP to change a
▼
.
, par. 0-22 Display Line 1.3 Small
▲ ▼
. Use the or buttons on the LCP to change a
▼
.
DST/Summertime Start and par.0-77
drive
Display
Display
, par. 0-23
Display
, par. 0-23 Display
8
DST/Summertime
8-13