Danfoss vlt AQUA Instruction Manual page 69

®
VLT AQUA Drive
Instruction Manual
Load Adjustable Frequency Drive Settings:
1. Connect a PC to the adjustable frequency drive via the USB com port
2. Open MCT 10 Set-up software
3. Choose "Open"– stored files will be shown.
4. Open the appropriate file.
5. Choose "Write to drive."
All parameter settings are now transferred to the adjustable frequency drive.
A separate manual forMCT 10 Set-up Software is available:
The MCT 10 Set-up Software Modules
The following modules are included in the software package:
Ordering number:
Please order the CD containing the MCT 10 Set-up software using code number 130B1000.
MCT 10 can also be downloaded from the Danfoss Internet:
MG.10.Rx.yy
.
MCT Set-up 10 Software
Setting parameters
Copy to and from adjustable frequency drives
Documentation and print-out of parameter settings incl. diagrams
Ext. User Interface
Preventive Maintenance Schedule
Clock settings
Timed Action Programming
Smart Logic Controller Set-up
WWW.DANFOSS.COM, Business Area: Motion Controls
®
MG.20.M5.22 - VLT is a registered Danfoss trademark
7 How to operate the adjustable frequency
.
drive
7
7-13