Danfoss vlt AQUA Instruction Manual page 55

®
VLT AQUA Drive
Instruction Manual
Min. Reference
Max. Reference
Initial Ramp-up Time
Final Ramp-down Time
Normal Ramp-up Time
Normal Ramp-down Time
Motor Min. Speed
Motor Max. Speed
Use the "Closed-loop" wizard under "Quick Menu_Funtion_Setup" to easily set up the feedback settings in the PID controller.
Pipe Fill Mode
Pipe Fill Enable
Pipe Fill Rate
Filled Setpoint
Par. 3-01
Par. 3-02
Par. 3-84
Par. 3-88
Par. 3-41
Par. 3-42
Par. 4-11
Par. 4-13
Par. 29-00
Par. 29-04
Par. 29-05
®
MG.20.M5.22 - VLT is a registered Danfoss trademark
6 Application Examples
(30 Hz)
(50/60 Hz)
(2 sec.)
(2 sec.)
(8 sec. depending on size)
(8 sec. depending on size)
(30 Hz)
(50/60 Hz)
(Feedback units/sec.)
(Feedback units)
6
6-3