Door Closure Mechanisms - GEAppliances CFE28TSH Technical Service Manual

The closure mechanism for each door is attached to
a recess in the bottom of the door with a 1/4 in. hex
head screw. To access the door closure mechanism,
it is necessary to remove the two T-20 Torx screws
and the door stop.
Door Stop
Door Closure Mechanism
The door closure mechanism has a spring loaded
pin that engages the lower door hinge.
To correctly align doors, adjust front legs until they
not match, turn each leveling leg separately until the
leveling matches across both doors.
The right door lower hinge bracket, attached to the
cabinet, has an adjustable pin that allows leveling of
the fresh food doors.
If the doors remain uneven, turn the adjustable pin
to raise or lower the right door to match the left
door. Use a 1/4 in. Allen wrench to turn the pin.
– 62 –
Adjustable Pin
1/4 in. Allen Wrench