GEAppliances CFE28TSH Technical Service Manual page 67

1. Remove the recessed 1/4 in. hex head screw
that attaches the front of the slide support to
the liner wall.
If there is not a screw in the front hole and
the deli pan side support does not come loose, look
for a screw in the second hole.
2. With the slide support against the liner wall,
pull the slide support toward the front of the
refrigerator.
Recessed Screw
When installing the slide support, make sure
to engage the slide post cutout into the slide post
before pushing the slide into place.
Slide Post
Second Hole
Slide Post Cutout
– 67 –
The deli pan fan is inserted in a Styrofoam™ recess
that is located on the inside of the fresh food
evaporator cover.
Deli Pan Fan
The deli pan fan will operate at 2000 to 6000 RPM
with RPM feedback to the control.
To access the deli pan fan assembly, it is necessary
to remove the fresh food evaporator cover. The deli
fan is only available with the fresh food evaporator
cover assembly
Deli Pan Fan