Ice Box Door Assembly - GEAppliances CFE28TSH Technical Service Manual

The ice box door assembly consists of the door,
latch, and gasket.
Door Panel
The ice box door assembly is attached to the left-
side refrigerator door with two hinges. To remove
the ice box door assembly, it is necessary to open
the door and remove the two T-15 Torx screws and
the top hinge. The door assembly can then be lifted
Top Hinge
Door Gasket
Door Latch
– 85 –
The door latch cover must be removed to access
the latch to the ice box door. The cover is attached
to the door with two rear tabs and two front tabs. A
the front of the latch cover.
Door Latch Cover
The cover can then be pulled toward the latch
handle and removed.
(Continued next page)