GEAppliances CFE28TSH Technical Service Manual page 35

The Café models have a feature to heat water for
a variety of uses. There are 5 presets programed
the brew module for brewing beverages.
1. Open the Brew Module (also called the Brewer)
by pressing the button, and drop in a beverage
Pod. Any standard single serve Pod can be used
in the Brewer.
2. Press the pod down onto the spike to puncture
the bottom of the Pod.
3. Close and latch the top of the Brewer to
puncture the top of the Pod.
Drop K-Cup
into brewer and
press down
firmly.
Push to
open
Close brewer.
Lid will click
when secure.
– 35 –
From a blank or home screen press the Hot Water
button to display hot water selection screen.
Select Keurig K-Cup Pod from the menu, or installing
the brew module will take you directly to the Serving
Size screen.
ounce must be selected to start the water heating.
(Continued next page)