GEAppliances CFE28TSH Technical Service Manual page 38

the Bracket and Motor Assembly nozzle.
At the end of the brewing time the isolation valve
and K-Cup® water valves close stopping the water
air pump continues to run for an additional
5 – 10 seconds. The Hot Water Outlet Valve opens
to blow air through the hot water outlet to clear
the pod of excess water and residual beverage to
minimize drips.
After the 5 – 10 seconds the air pump is turned
valves open and the Hot Water Outlet remains
open. Dispensing is complete and the
is displayed. All three valves remain open for an
additional 30 seconds to ensure there is no pressure
on the hot water system.
Cocoa and other beverage pods contain powder
that will dissolve during the brewing process. When
Cocoa is selected the heating temperature and time
– 38 –
screen
(Continued next page)