Dealer Demo Mode - GEAppliances CFE28TSH Technical Service Manual

To enter the Dealer Demo Mode, press Lock
Controls and Precise Fill pads simultaneously for
3 seconds.
The lights and fans (if previously operating) will still
operate, but the compressor will not operate. Exit
the demo mode by pressing the same buttons again.
When dealer demo mode is active, the following will
occur:
• The
• All heaters will be disabled.
•
operate the display function.
• The fans and dampers may run if prompted by a
user setting change.
• Opening the doors will not turn on the fans.
• Liner protection mode is active.
• The deli pan LED lighting will work normally.
• The deli fan will turn on at the heating mode speed.
• The deli pan settings will remain the same
between door openings, as the set points are not
reset.
• LED lighting will come on when the door or drawer
is opened and stay at full power for 8 minutes if
the door remains open.
• After 8 minutes, the LEDs will start to lower their
intensity in a smooth transition over the next
3 minutes to 75% of their original power and
remain there until the door(s) is closed. Closing and
reopening the doors will restart the timer.
• The user can activate and deactivate the Door
Alarm, Lock, Dispenser Light, and Reset Filter
functions.
• The user can adjust the temperatures, but the
cooling components will not operate.
• The user interface will display the actual
compartment temperatures.
• The paddle and switch will not operate dispenser
components if pressed.
• The TurboCool and TurboFreeze
TM
• The Precise Fill feature can be selected and
amount of water set, but the water valve will not
be activated.
will be displayed.
•
can be turned
TM
– 27 –
In Demo Mode, when the
button is pushed, a video tutorial will play
uninterrupted, then return to the demo home
screen. Once the video starts, it cannot be
stopped.
or
(Continued next page)