Sealed System - GEAppliances CFE28TSH Technical Service Manual

These are the Fault Codes for the Sealed System.
F300 N/A
F301 3 0 1
F302 3 0 2
F303 3 0 3
F304 3 0 4
F305 3 0 5
F306 3 0 6
F307 3 0 7
F308 3 0 8
N/A: Not applicable to any model. Disregard.
These are the Fault Codes for the Main Board.
F400 N/A
F401 N/A
F402 N/A
F403 4 0 3
F404 4 0 4
MB: Main Board, Cabinet
N/A: Not applicable to any model. Disregard.
N/A
the Cooling System turned on.
(This is going to be hard to see
because on some models, this
will trigger a reset)
N/A
FF Temp Exceeded 75°F
FZ Temp Exceeded 72.5°F
N/A
N/A
N/A
3 Way Valve Position Lost
MB SW Failure
MB HW Failure
– 117 –
Cooling System was on and the
hours.
fault will set if the Defrost has
not ran for 1 hour and the doors
have been closed for 1 hour and
the FF Temp is above 50°F
fault will set if the Defrost has
not ran for 1 hour and the doors
have been closed for 1 hour and
the FZ Temp is above 20°F
MB Failure: Replace MB
MB Failure: Replace MB