GEAppliances CFE28TSH Technical Service Manual page 86

The door latch is attached to the ice box door with 2
Phillips head screws.
The door gasket is secured to the door by a barbed
edge that locks into a retainer channel.
1. Starting at any corner, pull the old gasket out of
the retaining channel.
2. Soak the new gasket in warm water to make it
pliable.
3. Push the barbed edge of the gasket into the
retainer channel.
Starting in July 2015 the ice box door gasket is
integrated into the door and is not replaceable, the
ice box door must be replaced.
The bucket can be removed by pulling the door
latch down, opening the ice box door, then lifting
and pulling the bucket out.
Door Latch
– 86 –
L
I
F
T
(Continued next page)