Fault Codes - GEAppliances CFE28TSH Technical Service Manual

To enter , press and hold the
and pads together for 3 to 5
seconds.
Press to enter the
to main screen.
The display will show
The display will show 00 in the FZ temperature
display and 00 in the FF temperature display. This is
the setting to access the Fault Codes. Additionally,
will go to the home position (both closed), and the
dampers will go to closed position.
The will time out and go back to the main screen if no tests are performed within 5 minutes.
To exit
with
press GO.
With 00 00 displayed, press either GO to display Error Codes.
or to return
.
3-way valve
the boards, hold the
. Select . To exit and reset the boards, set the
,
, and
– 112 –
pads together down until prompted
to 00 16, then