GEAppliances CFE28TSH Technical Service Manual page 104

To enter , press and hold the
and pads together for 3 to 5
seconds.
Press to enter the
to main screen.
The display will show
The display will show 00 in the FZ temperature
display and 00 in the FF temperature display. This
is the setting to access the Service Diagnostic Tests.
the 3-way valve will go to the home position (both
closed), and the dampers will go to closed position.
The will time out and go back to the main screen if no tests are performed within 5 minutes.
To exit without resetting the boards, hold the
prompted with
16, then press GO.
,
or to return
.
,
. Select . To exit and reset the boards, set the
– 104 –
and pads together down until
to 00