GEAppliances CFE28TSH Technical Service Manual page 96

The water tank is located inside the left-side
refrigerator door. The water tank capacity is 16
ounces. It is necessary to remove the access panel
to replace the water tank.
1. Remove the T-20 Torx screw from the bottom
and the two T-20 Torx screws from the front that
attach the access panel to the door.
Access Panel
Access Panel (bottom)
2.
coupling.
3. Carefully push each collar in while pulling each
water line out from the coupling.
See note on page 40 regarding lock clips.
4. Remove the 1/4 in. hex head screw and water
tank.
Inlet
Clip
Collar
– 96 –
Outlet
Clip
Collar
(Continued next page)