Interaction - GEAppliances CFE28TSH Technical Service Manual

These are the Fault Codes for Interaction.
F700 7 0 0
F701 7 0 1
F702 7 0 2
F703 7 0 3
F704 7 0 4
F705 7 0 5
F706 7 0 6
F707 7 0 7
F708 7 0 8
F709 7 0 9
F710 7 1 0
F711 7 1 1
F712 7 1 2
F713 7 1 3
F714 7 1 4
F715 7 1 5
F716 7 1 6
Stuck keys On ICID/ACM/
(Dispenser Boards)
Stuck keys on Internal Temp
Board
Stuck keys on Deli Pan
Key inputs on Temp Board and
Door Closed
Key inputs on Deli Pan Board
and Door Closed
ACM/Comm communication
error
COM wrong version
Cold Water Cup Switch input
missing and 0x70 message is
received from COM (ACM Only)
Cold Water Cup Switch input
present and no dispense
message is received from COM
(ACM Only)
Hot Water Cup Switch input
missing and dispense message
is received that requires the cup
switch (ACM Only)
Hot Water Cup Switch input
present and no dispense
message is received (ACM Only)
FF Door open for 15 minutes
without closing
FF Door open for 60 minutes in
the last 24 hours
50 FF Door openings in the last
24 hours
FZ Door open for 15 minutes
without closing
– 121 –
Stuck Key is present on ICID/
ACM. Only send once per each
stuck key.
Stuck Key is present on Internal
Temp.Only send once per each
stuck key.
Stuck Key is present on Deli Pan.
Only send once per each stuck
key.
FF Door is closed and a key input
is detected.
FF Door is closed and a key input
is detected.
AutoFill Module not
communicating properly.
module is not compatible with
the ACM version.
COM module not communicating
properly.
COM version is not compatible
with the ACM.
Dispense message is received
and 30 seconds later the Cup
Switch input is still not present.
Cup Switch input is present for
30 seconds and no dispense
message has been received.
Dispense message is received
and 30 seconds later the Cup
Switch input is still not present.
Cup Switch input is present for
30 seconds and no dispense
message has been received.
Usage or door switch.
Usage or door switch.
Usage or door switch.
Usage or door switch.