Installation Modbus Client I/O Setup - Universal Robots UR3/CB3 User Manual

Pressing Create New will bring up a panel with a suggested name for the new vari-
able. The name may be changed and its value may be entered by touching either text
field. The OK-button can only clicked if the new name is unused in this installation.
It is possible to change the value of an installation variable by highlighting the variable
in the list and then clicking on Edit Value.
To delete a variable, select it in the list, then click Delete.
After configuring the installation variables, the installation itself must be saved to keep
this configuration, see 13.5. The installation variables and their values are also saved
automatically every 10 minutes.
If a program or an installation is loaded and one or more of the program variables have
the same name as the installation variables, the user is presented with two options to
resolve the issue: either use the installation variables of the same name instead of the
program variable or have the conflicting variables renamed automatically.
13.11 Installation
CB3
MODBUS client I/O Setup
II-50
13.11 Installation MODBUS client I/O Setup
Version 3.3.3