Setup Screen - Universal Robots UR3/CB3 User Manual

• Initialize Robot Goes to the initialization screen, see 11.5.
• Language and Units Configure the language and units of measurements for the
• Update Robot Upgrades the robot software to a newer version, see 15.2.
• Set Password Provides the facility to lock the programming part of the robot to
• Calibrate Screen Calibrates the "touch" of the touch screen, see 15.4.
• Setup Network Opens the interface for setting up the Ethernet network for the
• Set Time Set the time and date for the system and configure the display formats
• URCaps Setup Overview of installed URCaps as well as options for installation
• Back Returns to the Welcome Screen.
Version 3.3.3

15 Setup Screen

user interface, see 15.1.
people without a password, see 15.3.
robot control box, see 15.5.
for the clock, see 15.6.
and uninstallation, see 15.7.
II-111 CB3