B Declarations And Certificates; Ce/Eu Declaration Of Incorporation (Original) - Universal Robots UR3/CB3 User Manual

B Declarations and Certificates
B.1 CE/EU Declaration of Incorporation (original)
According to European Directive 2006/42/EC annex II 1.B.
The manufacturer Universal Robots A/S
Energivej 25
5260 Odense S
Denmark
hereby declares that the product described below
Industrial robot UR3/CB3
Serial number
may not be put into service before the machinery in which it will be incorporated is declared in confor-
mity with the provisions of Directive 2006/42/EC, as amended by Directive 2009/127/EC, and with the
regulations transposing it into national law.
The safety features of the product are prepared for compliance with all essential requirements of Directive
2006/42/EC under the correct incorporation conditions, see product manual. Compliance with all essential
requirements of Directive 2006/42/EC relies on the specific robot installation and the final risk assessment.
Relevant technical documentation is compiled according to Directive 2006/42/EC annex VII part B and
available in electronic form to national authorities upon legitimate request. Undersigned is based on the
manufacturer address and authorised to compile this documentation.
Additionally the product declares in conformity with the following directives, according to which the prod-
uct is CE marked:
2014/35/EU — Low Voltage Directive (LVD)
2014/30/EU — Electromagnetic Compatibility Directive (EMC)
2011/65/EU — Restriction of the use of certain hazardous substances (RoHS)
A complete list of applied harmonized standards, including associated specifications, is provided in the
product manual. This list is valid for the product manual with the same serial numbers as this document
and the product.
th
Odense, April 20 , 2016
Version 3.3.3
R&D
David Brandt
Technology Officer
I-59 UR3/CB3