Emc Test Certificate - Universal Robots UR3/CB3 User Manual

B.4 EMC Test Certificate
Attestation of Conformity
EMC assessment - Certificate no. 1351
From 29 June 2007 DELTA has been designated as Notified Body by the notified authority National
Telecom Agency in Denmark to carry out tasks referred to in Annex III of the European Council EMC
Directive 2004/108/EC. The attestation of conformity is in accordance with Article 5 and refers to the
essential requirements set out in Annex I.
.
DELTA client
Universal Robots A/S
Energivej 25
5260 Odense S
Denmark
Product identification
UR robot generation 3, G3, including CB3/AE for models UR3, UR5 and UR10
Manufacturer
Universal Robots A/S
Technical report(s)
DELTA Project T207371, EMC Test of UR5 and UR10 - DANAK-19/13884, dated 26 March 2014
DELTA Project T209172, EMC Test of UR3 - DANAK-19/14667, dated 05 November 2014
UR EMC Test Specification G3 rev 3, dated 30 October 2014
EMC Assessment Sheet 1351dpa
Standards/Normative documents
EMC Directive 2004/108/EC, Article 5
EN/(IEC) 61326-3-1:2008, Industrial locations, SIL 2 applications
EN/(IEC) 61000-6-2:2005
EN/(IEC) 61000-6-4:2007+A1
The product identified above has been assessed and complies with the specified standards/normative
documents. The attestation does not include any market surveillance. It is the responsibility of the
manufacturer that mass-produced apparatus have the same EMC quality. The attestation does not contain
any statements pertaining to the EMC protection requirements pursuant to other laws and/or directives other
than the above mentioned if any.
Hørsholm, 20 November 2014
Jakob Steensen
Principal Consultant
UR3/CB3 I-62
B.4 EMC Test Certificate
DELTA
Venlighedsvej 4
2970 Hørsholm
Denmark
Tel. +45 72 19 40 00
Fax +45 72 19 40 01
www.delta.dk
VAT No. 12275110
20aocass-uk-j
Version 3.3.3