Parts Replacement Procedure; Copyboard Glass; Removing The Copyboard Glass; After Replacing The Copyboard Glass - Canon Color iR C3480 Service Manual

Chapter 5

5.4 Parts Replacement Procedure

5.4.1 Copyboard Glass

5.4.1.1 Removing the Copyboard Glass

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550
1) Open the copyboard cover (or ADF) fully.
When opening/closing the copyboard cover, be careful not to get your hands
caught between the copyboard cover [1] and the rib [2].
It may cause injury.
F-5-33
2) Detach the glass retainer (right) [2].
- 2 screws [1]
3) Detach the copyboard glass [3].
F-5-34
When removing the copyboard glass, take care not to touch the following:
- glass surface
- standard white plate
5-20
The presence of dirt can cause white/black lines in the images. If dirt is
found, clean it with lint-free paper moistened with alcohol.
0014-1323
[1]
[2]

5.4.1.2 After Replacing the Copyboard Glass

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550
A. Enter the value indicated by the bar code found at the upper right on the
copyboard glass (copyboard cover) using the following service mode
items:
COPIER>ADJUST>CCD>W-PLT-X
COPIER>ADJUST>CCD>W-PLT-Y
COPIER>ADJUST>CCD>W-PLT-Z
(standard white plate white level data X, Y, Z)
F-5-35
0014-3112