Removing The Copyboard Glass - Canon SmartBase PC1200s Service Manual

Hide thumbs Also See for SmartBase PC1200s:

Table of Contents

CHAPTER 5 MECHANICAL SYSTEM

2.1.3 Removing the Copyboard Glass

1) Open the ADF (copyboard cover).

2) Remove the 2 screws [1], and detach the

copyboard glass retainer [2].

3) Remove the copyboard glass [3].

2.1.4 Removing the Main Motor Unit

1) Remove the upper cover. (See 2.1.1.7)

2) Remove the image processor PCB. (See

3) Remove the NCU PCB. (if equipped

with fax functions; See 2.2.5)

4) Remove the modular jack PCB. (if

equipped with fax functions; See 2.2.6)

5) Remove the plastic film [1].

2000 2000 2000 2000

CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001

Smartbase ir1200s