Storage; Service And Warranty; Disposal - Eaton DS7 Manual

1 Device series DS7

1.10 Storage

1.10 Storage

1.11 Service and warranty

1.12 Disposal

24
DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com
If the DS7 soft starter is stored before use, suitable ambient conditions must
be ensured at the storage site:
• Storage temperature: -25 - +60 °C,
• Average relative humidity: < 85%; no condensation
In the unlikely event that you experience a problem with your DS7 soft
starter, please contact your local sales office.
When you call, have the following data ready:
• The exact part no. (see nameplate)
• the date of purchase,
• A detailed description of the problem related to the DS7 soft starter
If some of the information printed on the rating plate is not legible, please
state only the data which are clearly legible.
Information concerning the guarantee can be found in the Terms and
Conditions Eaton Industries GmbH.
The soft starters of the DS7 series can be disposed of as electronic scrap in
accordance with national regulations.
Hotline After Sales Service
+49 (0) 180 5 223822 (de, en)
AfterSalesEGBonn@eaton.com