Table of Contents
Advertisement
8 SmartWire-DT
8.2 Profiles for DS7-SWD
8.2 Profiles for DS7-SWD
8.3 1-0-A switch
146
Table 24: Profiles for DS7-SWD soft starters
Profile
Name
1
DS7-SWD PKE1
2
DS7-SWD PKE2
3
DS7-SWD PKE3
4
DS7-SWD PKE1-8Bit
5
DS7-SWD PKE2-8Bit
6
DS7-SWD PKE3-8Bit
7
DS7-SWD PKE1-PD 2x16Bit
8
DS7-SWD PKE2-PD 2x16Bit
9
DS7-SWD PKE3-PD 2x16Bit
10
DS7-SWD 8Bit
11
DS7-SWD PD 2x16Bit
Acyclic data transfers to DS7-SWD soft starters are possible with all profiles
as per the "Base Mode Parameter Access" profile.
Soft starters belonging to the DS7-SWD series feature a 1-0-A switch that
can be used to manually switch the soft starter on and off.
②
①
1
A
0
④
Figure 114: Control section with mains contactor
a Connection for SmartWire-DT external device plug
b LED: SmartWire-DT diagnostic LED
c Data interface for PKE32-COM
d 1-0-A switch
DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com
Description
PKE profile 1, start/stop bit for DS7
PKE profile 2, start/stop bit for DS7
PKE profile 3, start/stop bit for DS7
PKE profile 1, control data for the DS7 in one extra byte (command)
at the end of the frame
PKE profile 2, control data for the DS7 in one extra byte (command)
at the end of the frame
PKE profile 3, control data for the DS7 in one extra byte (command)
at the end of the frame
PKE profile 1, control data for the DS7 in two extra words
(one-word command, one-word analog value) at the end of the frame
PKE profile 2, control data for the DS7 in two extra words
(one-word command, one-word analog value) at the end of the frame
PKE profile 3, control data for the DS7 in two extra words
(one-word command, one-word analog value) at the end of the frame
Control data for the DS7 in a single extra byte (command) without
PKE
Control data for the DS7 in two extra words
(one-word command, one-word analog value) without PKE
③
Advertisement
Table of Contents
