Eaton DS7 Manual page 24

1 Device series DS7
1.7 Technical data
20
DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com
The motor outputs listed below can be connected when using single-phase
AC motors (asynchronous capacitor motors) and a load suitable for soft
starters within an industrial environment:
Table 5: Assigned rated motor outputs for AC motors
Part no. Soft starter's rated
operational current
I (IEC)
e
A
DS7-34xSX004N0-... 4
DS7-34xSX007N0-... 7
DS7-34xSX009N0-... 9
DS7-34xSX012N0-... 12
DS7-34xSX016N0-... 16
DS7-34xSX024N0-... 24
DS7-34xSX032N0-... 32
1) Motor shaft output for normal four-pole internal and surface-cooled AC motors
(1500 rpm at 50 Hz or 1800 rpm at 60 Hz)
2) IEC: Mains voltage = Motor voltage (at load) 230 V
3) Reduced overload current acc. to UL 508C
4) Mains voltage 208 V / 240 V ↔ motor voltage 200 V / 230 V
￫
When using single-phase AC motors, the rated operational
current will depend on the system frequency and the capacitor
being used.
Example:
240 V, 50/60 Hz, 1.5/2.1 A
1300/1350 rpm, 5.0 μF CAP
Assigned motor output
2) 3), 4)
I (UL) 230 V
e
50 Hz
A kW
4.2 0.37
7.6 0.75
9.6 1.1
14 1.5
17.5 2.2
25.3 3
34 4
1)
at
200 V 208 V 230 V
60 Hz 60 Hz 60 Hz
HP HP HP
¼ ⅓ ⅓
½ ½ ¾
¾ 1 1
1 1½ 1½
2 2 2
3 3 3
5 5 5