6. Configure vPort FCoE mode.
7. Configure vPort default VLAN.
8. Ensure tagging is disabled on vPort.
9. Specify QoS parameters for the vPort.
10. Enable vPort.
11. Enable tagging/trunk mode on external port.
Example 7: Private VLAN Configuration
1. Select a VLAN and define the Private VLAN type as primary.
2. Configure a promiscuous port for VLAN 700.
338
CN4093 Application Guide for N/OS 8.2
CN4093(config_ufp_vport)# network mode fcoe
CN4093(config_ufp_vport)# network defaultvlan 1102
CN4093(config_ufp_vport)# no network defaulttag
CN4093(config_ufp_vport)# qos bandwidth min 25 (in
percentage)
CN4093(config_ufp_vport)# qos bandwidth max 100 (in
percentage)
CN4093(config_ufp_vport)# enable
CN4093(config_ufp_vport)# exit
CN4093(config)# interface port EXT4
CN4093(configif)# switchport mode trunk
CN4093(configif)# switchport trunk native vlan 1
CN4093(configif)# switchport trunk allowed vlan add 1,1102
CN4093(configif)# exit
Follow this procedure to configure a Private VLAN.
CN4093(config)# vlan 700
CN4093(config)# privatevlan primary
CN4093(config)# exit
CN4093(config)# interface port INTA10
CN4093(configif)# switchport mode privatevlan
CN4093(configif)# switchport privatevlan mapping 700
CN4093(configif)# exit