Safety Notes; Electrical Safety - Ametek Thermox Series 2000 WDG-IV User Manual

Safety Notes

wARnIngs, cAuTIons, and noTEs contained in this manual emphasize
critical instructions as follows:

NOTE

Electrical Safety

Up to 5 kV may be present in the analyzer housings. Always shut down power
source(s) before performing maintenance or troubleshooting. Only a qualified
electrician should make electrical connections and ground checks.
Any use of the equipment in a manner not specified by the manufacturer may
impair the safety protection originally provided by the equipment.
Grounding
Instrument grounding is mandatory. Performance specifications and safety
protection are void if instrument is operated from an improperly grounded
power source.
viii | Thermox Series 2000 WDG-IV / IVC / IVCM
An operating procedure which, if not strictly observed, may result in
personal injury or environmental contamination.
An operating procedure which, if not strictly observed, may result in dam-
age to the equipment.
Important information that should not be overlooked.
Verify ground continuity of all equipment before applying power.