Set Cal timers
5-20 | Thermox Series 2000 WDG-IV / IVC / IVCM
SET CAL TIMERS KEY
Figure 5-2. Set Cal timers menu options.
Sub-Menu
Set auto timers
Set auto timer for desired auto calibration/verification
cycle times.
Set time and Date
Set the current time and date.
Auto Cal On/Off
Enable or disable the auto calibration cycle.
Cal Gas Duration
Define how long cal gases should flow through the sen-
sor during automatic calibrations or verifications.
Recovery Duration
Define a recovery duration during which time the sensor
switches from measuring calibration gas readings to
measuring process readings without affecting the ana-
log output or triggering of alarms.
Set Auto Timers
Set Time & Date
Aut Cal On/Off
Cal Gas Duration
Recovery Duration
Function