Sensor : Wdg-Ivc - 0-500 Ppm - Ametek Thermox Series 2000 WDG-IV User Manual

Sensor : WDG-IVC - 0-500 PPM

Output Range
Oxygen
Combustibles
Accuracy
Oxygen
Combustibles
Response O2
Aspirator Air
Requirements
Max. Flue Gas Temp / Probe Type / Lengths
1300°F (704°c)
1875°F (1024°c)
3000°F (1649°C)
Max. Sample
Dewpoint
Sample Pressure
Environment
Ambient Temp.:
Relative Humidity: 10% to 90%, non-condensing
Enclosure
Hinged, stainless steel, weatherproof NEMA 4X (IP56). Flame arrestors standard. Optional
CENELEC and NEC Class I, Division 2 available.
Power Requirements
Calibration Gas Requirements
Use calibration gases @ 10 PSIG, 1.5 SCFH (0.70 kg/cm
o span gas:
2
o , Zero & comb
2
Zero gases:
comb span gas:
System Compliance
EMc compliance:
Safety Compliance:
NOTES
1. All static performance characteristics are with operating variables constant.
2. System accuracy referenced to 0.1 to 10% calibrated range.
3. Response is to calibration gas (with flame arrestors)
2-6 | Thermox Series 2000 WDG-IV / IVC / IVCM
From 0-1% to 0-100%
From 0-1% to 0-100%
From 0-500 ppm to 0-10,000 ppm or from 0-1% to 0-5%
± 0.75% of measured value or ± 0.05% oxygen, whichever is greater
± 25 ppm between 0 to 500 ppm or ±5% of full scale output range
90% of a process step change < 30 secs.
10 to 20 scfh (4.72 to 9.4 L/min) at 15 to 100 psig (1.05 to 7.04 kg/cm
316 ss 36" - 108" (91 cm - 271 cm)
310 ss 36" - 108" (91 cm - 271 cm)
®
Hexoloy 24" - 72" (60 cm-182 cm)
392°F (200°C)
± 10 inch water gauge
-5°F to 160°F (-20°C to 71°C);
-5°F to 140°F (-20°C to 60°C) with Div. 2 Option
115 VAC, ± 10%, 47-63 Hz, 600VA max.
(650 VA max. floor mount option)
Air or from 1.0 to 100% o
2% or from 0.1 to 10% o
80 to 100% of the selected combustibles recorder output range in certi-
fied mixtures of CO + H
2
2004/108/Ec
73/23/EEc
230 VAC, ± 10%, 47-63 Hz, 1850 VA max.
(1900 VA max. floor mount option)
2 , 0.7 L/min.)
, balance n
2 2
, balance n
2 2
, 3-4% o , balance n
2 2
2
)