Ametek Thermox Series 2000 WDG-IV User Manual page 175

62/98
63/99
64/100
65/101
66/102
67/103
68/104
69/105
6A/106
6B/107
6C/108
6D/109
A-20 | Thermox Series 2000 WDG-IV /I VC / IVCM
Cal_variable The calculated percent value that 0 mv
would correspond to with the cell that is
currently being used.
between different cells.
during calibration and used in the oxygen
calculations.
Option_flags
Option flags (1=true, 0=false)
bit 0 – combustible detector installed
bit 1 – Data module installed
bit 2 – 2 span value RCU
bit 3 – Methane detector installed
bit 4 – Dig – ma module installed
bit 5 – HART module installed
bit 6 – RS485 module installed
bit 7 – 3 span value RCU
Tspan_mv Cell mv value measured with the span gas
flowing during last calibration.
Tzero_mv Cell mv value measured with the zero gas
flowing during calibration.
Mthvalue
M_store
Cal_temp Last calib temperature
CJTemp Cold Junction temperature
Box_temp Box Temperature
Cmb_Kfact Combustible K Factor
Mth_Kfact Methane K Factor
This value can vary
It is calculated
IQ
Dual current output installed
IQ
auto cal option installed
3-in-1 option installed
IQ
IQ
IQ
IQ
Invalid option module S2
IQ
Read only
Read only
S2
S2
IQ
S2
Read only
R/W
Read only
Read only
R/W
Read only
Read only
R/W
R/W