Ametek Thermox Series 2000 WDG-IV User Manual page 182

SETUP KEY
Menu Options
Display
Passwords
Process Pressure
System Tests
System Serial #
Primary Calibration
Sensor Configuration
communications
combustibles
Table B-1. Setup Key Menu
ANALOG KEY
Menu Options
set current Range
Set Track/Hold
set current Mode
output Filtering
select Function
Table B-2. Analog Range Key menu.
MENU OPTION CHARTS
Select info for Display Line 1.
Select info for Display Line 2.
Select info for Display Line 3.
Create a system password
select a positive or negative process pressure.
Enter process pressure value.
Perform internal diagnostics on series 2000.
View serial number for Series 2000.
View manufacturing number for Series 2000.
Perform an automatic, remote, or manual primary calibration.
Select sensor type.
Define communications parameters.
Define combustibles scale (% or PPM).
Define combustible detector type.
Range of readings that the analog output represents (for
example:
4% o = 4 mA
2
10% o = 20 mA)
2
Hold output at last process reading during a cal or verify
0 to 20 mA
4 to 20 mA
smooth out variations in readings
% o
2
cell temperature
cell Millivolts
Thermocouple Millivolts
combustibles (option)
Methane (option)
Functions/Options
Functions/Options
Menu Option Charts | B-1