Ametek Thermox Series 2000 WDG-IV User Manual page 171

45/69
46/70
47/71
48/72
49/73
4A/74
4B/75
4C/76
4D/77
4E/78
4F/79
50/80
51/81
52/82
53/83
54/84
55/85
56/86
57/87
58/88
59/89
5A/90
5B/91
5C/92
A-16 | Thermox Series 2000 WDG-IV /I VC / IVCM
Cal_h10 Auto calibration hour value
Cal_h1 Auto calibration hour value
Cal_m10 Auto calibration minute value
Cal_m1 Auto calibration minute value
Ver_h10 Auto verify time hour value
Ver_h1 Auto verify time hour value
Ver_m10 Auto verify time minute value
Ver_m1 Auto verify time minute value
Pressure Process pressure.
Optemp The cell temperature setpoint
Optemp_range Operating temperature for sensor, 0 is
normal, 1 is high, 2 is RM CEM
Cmbref Reference voltage reading for Combustibles
channel
Cmbact Active voltage reading for Combustibles
channel
Cmbgnd Ground reading for Combustibles channel
Mthref Reference voltage reading for the Methane
channel.
Mthact Active voltage reading for Methane channel
Mthgnd Ground reading for Methane channel
AT Cell slope
AT_ratio Cell slope used during last calibration.
Tc_ratio Cell/thermocouple compensation multiplier
Cmbslope Combustibles slope during last calibration
Mthslope Methane slope during last calibration
Cal_cycle Interval between auto cals [1 hour to 90
days]
Ver_cycle Interval between auto verifies [1 hour to
90 days]
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Read only
R/W
IQ
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
R/W
R/W