Exception Log - Ametek Thermox Series 2000 WDG-IV User Manual

Exception Log

The exception log provides a history of the following types of events:
• System or error messages
• Alarm conditions
• Reset conditions
• Start of calibrations or verifications
Accessing the exception log
• From the Alarm menu, select Exception Log.
The system displays the most recent exception log entry on line four of
the display. It also displays when the event was recorded on line three.
Line three of the display indicates the order in which events are recorded
into the log, with number 1 being the most recent entry into the log. The
system is able to store the 20 most recent entries in this exception log.
Pressing the Down arrow key shows later exception log entries. Pressing
the Up arrow key shows more recent exception log entries. Press Cancel
at any time to exit this menu option.
Controller / User Interface | 4-27