Table of Contents
Advertisement
Safety Notes
WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical
instructions as follows:
Electrical Safety
High voltages are present in the analyzer housings. Always shut down power source(s)
before performing maintenance or troubleshooting. Only a qualified electrician should
make electrical connections and ground checks.
Any use of the equipment in a manner not specified by the manufacturer may impair
the safety protection originally provided by the equipment.
Grounding
Instrument grounding is mandatory. Performance specifications and safety protection
are void if instrument is operated from an improperly grounded power source.
PN 903-8797, Rev A
Important information that should not be overlooked.
An operating procedure which, if not strictly observed, may result in personal
injury or environmental contamination.
quirements are also included in – but are not limited to – Warnings.
An operating procedure which, if not strictly observed, may result in damage
to the equipment.
Burn hazard. Hot surface. Do not touch, allow to cool before servicing.
Verify ground continuity of all equipment before applying power.
Essential Health and Safety Re-
Contents | vii
Advertisement
Table of Contents
Troubleshooting
