Table of Contents
Advertisement
Setting up Default Settings for the Transcoder
1
From the user interface of the D9859, choose Transport Stream > Transcoder
Setup. The Transcoder Setup page is displayed.
Note: Subtitle Burn-In is not supported.
2
From the Action on Loss of Input drop-down list, choose the transcoder action
on loss of input, which is the action that the transcoder takes when there is a loss
of input signal (No Output or Black Output).
3
Click the Transcoder 1 Output to Transcoder 8 Output radio buttons to select
the transcode channel video mode. The selections are Auto, HD Output, and SD
Output.
Setting
Auto
OL-31980 -01
Configuring Transport Stream Information
Description
Leaves the input video format and resolution
unchanged. That is, SD in - SD out, HD in -
HD out.
213
Hide quick links:
Advertisement
Table of Contents
