Cisco D9859 Installation And Configuration Manual page 105

Stream
16:9
16:9
16:9
16:9
16:9
Note: Active Format Descriptor (AFD) - normally it is necessary to set both the TV
Aspect Ratio and Conversion to correctly display the video program on the TV
system. The Auto AFD option enables the receiver output to automatically match the
display format of the video program to the TV system based on specific (uplink)
program information carried in the transport stream. In this case, the receiver
performs the conversion based on the TV Aspect Ratio setting combined with the
program-specific uplink information to provide the "best fit" for display of the
program material on the TV. This feature is primarily used in 16:9 and 14:9 (wide
screen) applications.
Audio
Menu Item
Aud#
OL-31980 -01
TV A/R Conversion
4:3 16:9 L/B
4:3 4:3 CCO
4:3 4:3 P/B
4:3 14:9
4:3 16:9 SCALE
Description
Sets which balanced audio output
on the rear panel to configure.
Act Conv Description
16:9 L/B Vertically down-samples
the picture and applies
black bars at the top and
bottom of the screen.
4:3 CCO Horizontally up-samples
the center portion of the
picture to fill the screen.
None Conversion is not
possible. Picture appears
tall and thin.
14:9 Compromises some up-
sampling. Some black
bars and some cropping
are visible.
None Conversion is not
possible. Picture appears
tall and thin.
Image
Parameters
1 or 2
Setup Menu
81