Cisco D9859 Installation And Configuration Manual page 230

Chapter 5 Web GUI Setup and Monitoring
14 To remove a PID mapping, click the radio button of the entry you want to
remove and click Delete.
15 Click OK.
16 In the DPM Program Entry Setup area, each PE output can be synchronized to
its input according to one of the four output modes. Click the radio button of the
program entry you want to synchronize and then click Resynchronize or click
Resynchronize All to synchronize all the listed PE outputs to its inputs. The
Confirm Resynchronization window is displayed.
17 Select whether you want to synchronize services and PIDs, services only, PIDs
only, or to synchronize using a template.
Map Mode
Resynchronize Program, PMT
PID, ES List & ES PIDs
Resynchronize ES List
Resynchronize ES PIDs
Resynchronize Template ES List
& PIDs
18 Click OK.
206
Description
The transcoder will synchronize the PE output according
to the services and then the PIDs assigned to each
service.
The transcoderwill synchronize the PE output according
to the available input services only, and ignore the input
to output service PID mapping.
The transcoder will synchronize the PE output according
to the input PIDs only, and ignore the service assignment
categories/names.
Allows you to preset the input to output mapping of a PE
according to the preset template. This is helpful in pre-
configuring any number of PEs for future use.
OL-31980-01