Cisco D9859 Installation And Configuration Manual page 319

Alarm Message
Type
Decoder Set
Processor Start
Decoder Clear
Processor Start
LEC Timeout Set
LEC Timeout Clear
FPGA status Set
FPGA status Set
OL-31980 -01
Message Cause/Remedy
Synchronization Cause: Hardware
Failure issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco customer
support if the
problem persists.
Boot passed –
LEC Table Cause: Possible
Missing/timeout: LEC Server or
channels
Uplink issue.
currently
Remedy: Check
unavailable
LEC Server setup
and uplink
configuration for
GDS PID setup.
Clear alarm and
notify Cisco
customer support
if the problem
persists.
LEC received –
FPGA Init failed Cause: Hardware
to go high issue.
Remedy: Clear
alarms, reset the
unit, notify Cisco
customer support
if the problem
persists.
FPGA Init and Cause: Hardware
Done failed to go
issue.
low
Remedy: Clear
alarms, reset the
unit, notify Cisco
customer support
if the problem
persists.
Description Severity
Communicatio Major
n with
secondary
processor
failing.
– Major
ECT Table is Major
not received in
the GDS
stream.
– Major
FPGA setup Major
failure or the
FPGA binary
identity does
not match the
FPGA registers.
FPGA setup Major
failure or the
FPGA binary
identity does
not match the
FPGA registers.
ID
38000
38000
38500
38500
39000
39000
295