Table of Contents
Advertisement
Note: The DPM resolves any output conflicts automatically, even if the Enable
Auto Fix for Collision is set to No.
5
Click Apply.
Setting the Maximum and Minimum Transport Packets
The maximum and minimum transport packets are set in the Limits area of the
MPEG over IP Output page.
1
In the Maximum Transport Packets/Ethernet Frame field, enter the maximum
number of transport packets per IP packet (1 to 7).
2
In the Minimum number Packets/Second field, enter the minimum number of
transport packets per IP packet. You can enter 0 or 2 to 1000.
Configuring MPEG over IP Streams
1
In the MPEG over IP Output page (Transport Stream > MPEG over IP Output),
click Stream. The MPEG over IP Output Stream page is displayed.
The following table describes the stream information:
OL-31980 -01
Configuring Transport Stream Information
201
Hide quick links:
Advertisement
Table of Contents
