Table of Contents
Advertisement
Parameter
Pilots
I/Q
Signal Status
TS ID
Input
Acquisition State
Orbital Validation
OL-31980 -01
Description
Indicates whether a Pilot is present for the received signal. The
Pilot is set on the modulator for input signal synchronization
purposes.
The IQ (Input Signal Inversion) for the received signal (Inv or
NonInv).
Indicates whether the input signal is locked.
Locked - Indicates the transcoder is locked to a carrier
with no valid content.
Lock+Sig - Indicates the transcoder is locked to a
carrier with valid content.
No Lock - Indicates the transcoder is not locked to a
carrier.
The Transport ID (in the range from 1 to 65535).
The active input port receiving the signal (RF1, RF2, RF3, RF4, or
ASI).
Displays Full if the ASI and PSI tables have all been found.
Otherwise, it will display Degraded if there are missing tables or
None if no ASI or PSI tables have been found.
Displays the last date that the Validate Orbital Position
operation was performed.
Setting up Input Information
145
Hide quick links:
Advertisement
Table of Contents
