Cisco D9859 Installation And Configuration Manual page 282

Chapter 5 Web GUI Setup and Monitoring
Downloading the Software Application
In the Download APP area, click Choose File to select the new version of FPGA or
the D9859 Advanced Receiver Transcoder's software application. The Open dialog
opens. Select the upgrade file and click Open. Click Download to download the
selected upgrade file. File formats that can be downloaded include Application
CDTs and FPGA CDTs.
During the upgrade, click Return to Browser (not recommended) to return to the
web browser. The application download continues. It is not recommended to
interrupt the upgrade during the application download. Click Download Status
Toggle to move between updating the Download Status data on the Versions page
and updating the download status on an external device.
Note: For application downloads, once the download is complete, the D9859
transcoder will reboot automatically. For FPGA downloads, you must click Reboot
Receiver to manually reboot the D9859 transcoder and complete the download. This
is to facilitate the typical case in which the user intends to flash the FPGA file (no
auto reboot) followed by an APP download (auto reboot).
Note: If you are downloading an older version of the software application, it is
recommended that you clear the browser cache prior to logging back in to the D9859
web GUI.
Downloading a Software License
If the unit is new from the factory, without any licenses loaded, it is recommended
that you wait three minutes after you first boot up the unit before downloading a
license file. If the unit has previously loaded licenses, it is recommended that you
wait ten minutes after you boot up the unit before downloading a new license file.
In the Download APP area, click Choose File to select the software license file. The
Open dialog opens. Select the license file and click Open. Click Download to
download the selected license file. You must wait approximately 100 seconds before
you can view the updated transcode license information. For more information on
license information, see Viewing Hardware Features and Base License Information
(on page 219).
258 OL-31980-01