Cisco D9859 Installation And Configuration Manual page 215

Map Mode
Resynchronize ES List
Resynchronize ES PIDs
Resynchronize Template ES List
& PIDs
3 Click OK.
If a conflict occurs, a message that the conflicts will be fixed automatically and to
preview the changes prior to saving is displayed. Click View Conflicts to view a
detailed list of all the conflicts in the Output Channel and PID Conflicts
window.

For channel conflicts, the system will only automatically change the
duplicated output channel numbers. If both PE actions are set to Map or
XCode, the output channel number of the higher PE is changed. Otherwise,
the output channel number of the mapped and transcoded PE is changed.
The new channel number selected is the next channel number that does not
appear in the current PAT or belong to any other PEs.

For PID conflicts, the system will only automatically change the duplicated
output PID numbers. If both PE actions are set to Map or XCode, the output
PID number of the higher PE is changed. Otherwise, the output PID number
of the mapped or transcoded PE is changed. For example, if the PMT PID of
PE1 matches the ES PID of PE2, the ES PID of PE2 is changed. The new PID
number selected is the next number that does not appear in the output of any
PE and it is not in the current transport input.
Click Apply to save the resolved conflict changes.
OL-31980 -01
Configuring Transport Stream Information
Description
The transcoder will synchronize the PE output according
to the available input services only, and ignore the input
to output service PID mapping.
The transcoder will synchronize the PE output according
to the input PIDs only, and ignore the service assignment
categories/names.
Allows you to preset the input to output mapping of a PE
according to the preset template. This is helpful in pre-
configuring any number of PEs for future use.
191