Cisco D9859 Installation And Configuration Manual page 124

Chapter 4 Front Panel Operation
DPM - Global
Menu Item
Resync All:
Regenerate
Copy:
ASI/MOIP
Menu Item
PE
InCh
PMT
100
Description
Select to resynchronize all DPM
output with the PMT data for
all program entries on the
selected output.
Selects whether to regenerate
the PSI tables in the output.
This copies all DPM data from
either the ASI output to the
MOIP output (MPEG over IP)
or from the MOIP output to the
ASI output depending on your
selection.
Description
Select the Program Entry to
configure.
Displays the channel number to
which the PE is tuned. This is
read-only.
Indicates the input PID value of
the Program Map Table for the
current channel. This is read-
only.
Parameters
ASI
Always or As Needed
Always - All tables are regenerated.
As Needed - Only regenerate the
tables if the content has changed.
ASI->MOIP or MOIP->ASI
Parameters
1 to 8 (main program)
1A to 8A (auxiliary program)
1 to 65535
2 to 8190
OL-31980-01