Managing D9859 Web Gui Accounts - Cisco D9859 Installation And Configuration Manual

Managing D9859 Web GUI Accounts

You can define up to 10 usernames/passwords for login use via web GUI session on
the D9859 transcoder.
When a user tries to login, the user is required to provide a username and a
password. The user is granted access only if this username/password pair exists in
the authentication table.
The factory preset "Admin" account has Admin privileges and is allowed to add new
users, delete users, change usernames, and modify its own passwords. Users with
non-Admin privileges (for example, User and Guest) are only allowed to modify
their own passwords.
To Change the User Login Passwords
1 From the user interface of the D9859, choose System Settings > Account
Management. The Account Management page is displayed.
To configure the password complexity for all users:
Note: This feature is only available to a user with Admin privileges only.
2 From the Password Complexity drop-down list, choose the complexity of the
password (No Checking, Minimal Checking, Full Complexity Checking). Any
changes take effect immediately, and do not require the use of the Apply button.
The following describes the rules for each level:
OL-31980 -01
Configuring System Settings
245