Cisco D9859 Installation And Configuration Manual page 167

15 In the Crossover field, enter the crossover frequency for RF1, RF2, RF3, and/or
RF4. This is an internal threshold frequency used for selecting the LO1 or LO2
frequency, depending on the current downlink frequency settings. This option is
only used in dual-band LNB applications.
You can enter a value in a range from 0.0 to 15.0 GHz. In single-band LNB
applications, set this value to 0.0.
16 From the Polarisation drop-down list, choose the signal polarisation setting
(Horizontal, Vertical, or Automatic). This setting is only applicable when the
LNB Power is set to H-NIT or V-NIT. It marks the polarity of the signal
connected to the current RF input.
17 In the Orbital Posn field, enter the orbital position for RF1, RF2, RF3, and/or
RF4, in degrees. This is the location in orbit of the satellite currently being used.
The satellite position (in degrees) in combination with the direction (either E
(East) or W (West)) denotes the satellite position the dish connected to the
current RF Input should point. This is used when the satellite is not available in
the look-up menu list.
For manual configuration, enter the location of the satellite using the numerical
keypad. The receiver will not recognize the satellite name and identify it as
Unknown. This setting is required to resolve any ambiguity between RF inputs
during automatic disaster recovery.
18 From the East/West Flag drop-down list, choose the east/west flag for RF1, RF2,
RF3, or RF4. This is the satellite position the dish connected to the current RF
Input should point. The options are East, West, or N/A (Not Applicable).
19 Click Apply.
If a disaster recovery is in progress, a message is displayed, recommending that
you do not apply the setup changes during a disaster recovery.
Click Close. If you want to save your changes during a disaster recovery, click
Apply again. The warning message is displayed again. Click OK to confirm your
changes. The changes are saved.
OL-31980 -01
Setting up Input Information
143