Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
Setting up IP Information
1
From the user interface of the D9859, choose System Settings > IP Settings. The
IP Settings page is displayed.
Note: The D9859 transcoder is a single data port unit. The Redundancy Control
and Redundancy Status sections are not supported.
2
In the IP Settings table, you can set the parameters for communicating with other
equipment via the Ethernet Data and Management ports for IP applications and
upgrading application software.
3
Click the control or data radio button to edit the control or data settings and set
the IPv4 Destination IP Address for the interface. The address is 12 digits in
length (###.###.###.###). The Statmux port is not supported.
4
Set the number of CIDR (Classless Inter-Domain Routing) bits in the network
Mask (8 to 30).
220
OL-31980-01
Hide quick links:
Advertisement
Table of Contents
