Cisco D9859 Installation And Configuration Manual page 264

Chapter 5 Web GUI Setup and Monitoring
The Transcode - Firmware Versions table displays the version numbers applicable to
the Transcoder printed circuit board.
Menu Item
Transcoder Board Rev Displays the Printed Circuit Board (PCB) revision of the
MCL
MDL
Transcoder
Power Sequencer
FPGA
Transcoder Board SN
The HW Board Versions table displays the revisions, option bits, and serial numbers
of the main board (TMB) and the transcoder board (TXB).
The Transcode - Software Versions table lists all the software packages used for the
D9859 transcoder. For more information on the software versions, contact Cisco
customer support.
240
Description
transcoder board.
Indicates the hardware initialization version number for the
transcoder devices on the transcoder board.
Displays the software version number that provides
software access to the transcoder devices.
Displays the version of the firmware performing the
transcode.
Indicates the firmware version running on the power-
sequencer, a chip that controls power-up and power-down
of multiple power supplies.
Indicates the Field Programmable Gate Array (FPGA)
version number.
Indicates the serial number that is uniquely assigned to the
transcoder board.
OL-31980-01