Chapter 5 Web GUI Setup and Monitoring
Viewing Version Information
From the user interface of the D9859, choose System Settings > Versions. The
Versions page is displayed.
The Current Versions area displays the currently running loaded application
version and the current limit for the Field Programmable Gate Array (FPGA) version
number. In the Version Controls section, in the first drop-down list (SW APP), you
can choose a different application version number to load. In the second drop -down
list (FPGA), you can choose a different FPGA version number to load. The Selected
Version window is displayed. Click Select & Reboot to load the selected application
and reboot the transcoder. Click Erase to remove the selected application version.
You will be prompted to continue or not. Click OK to continue the deletion.
The Main Board - Firmware Versions area displays the following version
information:
Firmware Version
Boot5514/Boot7109
236
Description
Software boot-loader version that initializes and
configures the STi5514/STi7109 device on the TMB
(main) board. This is the master controller for the
D9859 transcoder.
OL-31980-01