Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
Setting up SNMP Information and Trap Destinations
1
From the user interface of the D9859, choose System Settings > IP Settings >
SNMP. The SNMP page is displayed.
2
In the Read Community String and the Write Community String fields, enter
public (default) or custom string. Set the password to read/write data from a
device and to display diagnostic traps/alarms. This is used when
communicating with a device within an SNMP environment. To set a custom
community string, enter an alphanumeric character string up to 31 alphanumeric
characters in length identifying the password for the device.
Note: The community string is case-sensitive.
3
In the System Name, System Location, and System Contact fields, enter the
information of the D9859 transcoder. The system information is sent to the MIB
browser, if applicable. The MIB Browser is a third party software used to manage
SNMP requests. For more information, contact Cisco Services.
4
Click Apply.
To Add a Trap Destination
1
Click Add Row in the Trap Destination Configuration area.
2
In the Trap Destination IP Address field, enter the IP address that sets the
destination for SNMP trap messages for system events (fault messages). You can
enter up to 12 characters.
228
OL-31980-01
Hide quick links:
Advertisement
Table of Contents
