Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
1
From the user interface of the D9859, choose Transport Stream > Digital
Program Mapping under MPEG over IP Output. The MPEGoIP Digital Program
Mapping page is displayed.
2
For each DPM Program Entry, it displays the input channel number (Chl #) and
channel Name.
There are eight channels (PE1 to PE8), with eight auxiliary channels (PE1A to
PE8A). The auxiliary channels automatically tune to the corresponding PE
channels. If the PE is not transcoded, the auxiliary PE is dropped.
Note: Any changes made to the MOIP DPM values will automatically changes
the Mode Status to Edited by User in the MPEG over IP Output page.
3
Click the radio button of the program entry you want to edit.
If you want to configure an auxiliary PE, it is highly recommended that you
perform the following:
From the Enable Auto Map For Auxiliary PEs drop-down list, choose Yes in
-
the ASI Outputs page.
Set PxA to Map.
-
Click Resynchronize All to ensure that the inputs and outputs are the same.
-
4
From the Action drop-down list, choose the DPM program action for the PE
(Pass, Map, or Drop). The default is Pass.
204
OL-31980-01
Hide quick links:
Advertisement
Table of Contents
