Table of Contents
Advertisement
6 MADSEN Zodiac test controls
•
Use the dial or the arrow buttons to select another test protocol, if needed.
•
Press the soft-button below the next column to select this column, and scroll to any setting you wish to view or
change.
How to change test settings
1. Start by selecting a protocol.
2. Select the center column.
3. Scroll to the setting you wish to view or change.
4. Select the right-hand column to change the setting.
5. Scroll to the value you wish to use and press the
6. Repeat steps 2 to 5 to change other settings, if needed.
Using test settings temporarily
•
If you only wish to use the changed protocol settings temporarily, select the left-hand column, scroll to
porarily
Saving test settings in the protocol
Before you can save test settings in the protocol, you must unlock the protocol: Select
tings
, and set to
again.
•
If you wish to save the changed protocol settings permanently, select the left-hand column, scroll to
name]
, and press the
Canceling changed test settings
•
If you wish to cancel the settings you have changed, select the protocol and press the
6.4
Special tests
The Diagnostic and Clinical versions of Zodiac can perform a number of special immittance tests, such as ETF-P and Manual
Tympanometry.
Accessing special tests
When you press the
You can access the
Loading a special test
1. Press the
2. Scroll to select the special test you wish to use.
3. Press the
Exiting a special test
Special
Press the
34
and press the
OK
soft-button. This will exit the menu system.
Allowed
. If you switch off Zodiac after changing and saving the test settings, the protocol will be locked
Save
soft-button.
Special
button, the available tests are shown.
Probe Check
function from the
Special
button.
OK
soft-button.
button to exit the special test. Zodiac returns to Tympanometry mode.
Select
soft-button.
Special Tests
menu.
Apply Tem-
Device Settings..
Protocol Set-
>
Save to [Protocol
Reload
soft-button.
Otometrics - MADSEN Zodiac
Advertisement
Table of Contents
